Enter an Autoclave Cycle

Each cycle - successful and/or failed - must be entered into the Sterilisation module for accurate record keeping. 

1. Click the navigation menu > Management > Sterilisation page

2. Select the autoclave to add the cycle against from the Autoclave drop list

3. Scroll to the bottom of the Autoclave Cycles list

   1. Add a cycle ID or keep the auto entered ID
      

      

   2. Click Tab key to generate the autoclave pack

      1. Click Scan (or type in the Bar Code number if no scanner available)

      2. Scan the relevant barcodes on the packs

      3. Contents: Select the pack contents